LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Automatic Transaxle - 4T65-E - Overhaul) >> Repair Instructions >> Fourth Clutch Components Removal >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 Saturn Relay, 2006 Pontiac Montana SV6, 2006 Pontiac Grand Prix, 2006 Pontiac G6, and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Fourth Clutch Components
    GM1738259Courtesy of GENERAL MOTORS CORP.
  1. Remove the fourth clutch fiber and steel plates (501, 502) or (529, 530),some models.
  2. Remove the fourth clutch apply plate (528).
  3. Remove the fourth clutch shaft assembly (504).
  4. Remove the drive link lube scoop (608).