LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Automatic Transaxle - 4T65-E - Overhaul) >> Repair Instructions >> Forward Band Assemble >> Assembly Procedure

Assembly Procedure

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 Saturn Relay, 2006 Pontiac Montana SV6, 2006 Pontiac Grand Prix, 2006 Pontiac G6, and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Forward Band Assembly Inspection Areas
    GM10610Courtesy of GENERAL MOTORS CORP.
  1. Inspect the forward band assembly (688) for the following conditions:
    • Damaged or severely worn friction material
    • Damaged apply or anchor pin features
  2. Inspect the bearing (691) from the differential carrier internal gear for damage.
    3. Fig 2: Identifying Forward Band Assembly & Bearing
    GM893330Courtesy of GENERAL MOTORS CORP.
  3. Position the transmission case so that the flange for the case cover is facing up.
  4. Install the bearing (691) for the differential carrier internal gear into the case. Position as indicated.
  5. Install the forward band assembly (688) into the case.
    • Locate the band assembly onto the forward band anchor pin
    • Position the band apply pin feature in the opening of the case
scientia non olet · About LEMON Manuals