Disassembly Procedure

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 Saturn Relay, 2006 Pontiac Montana SV6, 2006 Pontiac Grand Prix, 2006 Pontiac G6, and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Driven Sprocket Support Bearing Assembly

Courtesy of GENERAL MOTORS CORP.

Use J 34129 , J 8092 and a hammer in order to remove the driven sprocket support bearing assembly from the driven sprocket support assembly (609).