LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Automatic Transaxle - 4T65-E - Overhaul) >> Repair Instructions >> Differential Carrier Internal Gear Assemble >> Assembly Procedure

Assembly Procedure

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 Saturn Relay, 2006 Pontiac Montana SV6, 2006 Pontiac Grand Prix, 2006 Pontiac G6, and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Differential Carrier Internal Gear Assembly Inspection Areas
    GM10589Courtesy of GENERAL MOTORS CORP.
  1. Inspect the differential carrier internal gear assembly (693) for the following conditions:
    • Damaged or worn bushings
    • Plugged lube oil holes
    • Damaged case splines
    • Damaged or worn gear teeth
    • A damaged or worn park pawl assembly (694)
    • A damaged snap ring (692)
    2. Fig 2: View Of Differential Carrier Internal Gear Assembly
    GM10590Courtesy of GENERAL MOTORS CORP.
  2. Install the differential carrier internal gear assembly (693) into the case. Align the park pawl assembly with the park pawl actuator assembly.
    3. Fig 3: Using J 28585 To Install The Snap Ring Into The Case
    GM10591Courtesy of GENERAL MOTORS CORP.
  3. Use J 28585  or a long screwdriver in order to install the snap ring (692) into the case as shown.
scientia non olet · About LEMON Manuals