LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Automatic Transaxle - 4T65-E - Overhaul) >> Repair Instructions >> Differential Carrier Components Assemble (FWD Only) >> Assembly Procedure

Assembly Procedure

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 Saturn Relay, 2006 Pontiac Montana SV6, 2006 Pontiac Grand Prix, 2006 Pontiac G6, and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Assembling Differential Carrier
    GM214412Courtesy of GENERAL MOTORS CORP.
  1. Assemble the final drive sun gear (697) with the chamfered side toward the parking gear (696) into the differential/final drive carrier assembly (700).
  2. Assemble the parking gear (696) onto the final drive sun gear shaft (689)
  3. Assemble the final drive sun gear shaft/parking gear assembly (689/696) into the final drive sun gear (697).
    4. IMPORTANT: Apply J 36850  or equivalent to the parking gear side of the bearing (695).
  4. Assemble the internal gear/parking gear thrust bearing (695) to the parking gear (696).
    5. Fig 2: Installing Differential Carrier
    GM214413Courtesy of GENERAL MOTORS CORP.
  5. Install the differential/final drive carrier assembly into the case.
scientia non olet · About LEMON Manuals