LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Automatic Transaxle - 4T65-E - Overhaul) >> Repair Instructions >> Case Extension Assembly Removal >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 Saturn Relay, 2006 Pontiac Montana SV6, 2006 Pontiac Grand Prix, 2006 Pontiac G6, and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Differential/Final Drive Carrier Assembly Thrust Bearing
    GM10554Courtesy of GENERAL MOTORS CORP.
  1. Remove the two case extension bolts (5).
  2. Remove the case extension assembly (6) and remove the seal (8).
  3. Remove the differential carrier thrust washer (715).
  4. Remove the differential carrier thrust bearing (714).
scientia non olet · About LEMON Manuals