LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Automatic Transaxle - 4T65-E - Overhaul) >> Repair Instructions >> 2-1 Manual Band Assemble >> Assembly Procedure

Assembly Procedure

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 Saturn Relay, 2006 Pontiac Montana SV6, 2006 Pontiac Grand Prix, 2006 Pontiac G6, and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Inspection Areas On 2-1 Manual Band
    GM10618Courtesy of GENERAL MOTORS CORP.
  1. Inspect the 2-1 manual band (680) for the following:
    • Cracked or separated friction material
    • Burnt friction material
    • Cracks around the apply lugs
    2. Fig 2: View Of Manual 2-1 Band Assembly
    GM893326Courtesy of GENERAL MOTORS CORP.
  2. Squeeze the manual 2-1 band assembly (680) and install the assembly into the case.
  3. Position the band on the anchor pin.
scientia non olet · About LEMON Manuals