LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Automatic Transaxle - 4T65-E - Overhaul) >> Repair Instructions >> 1-2 Support Roller Clutch Disassemble >> Disassembly Procedure

Disassembly Procedure

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 Saturn Relay, 2006 Pontiac Montana SV6, 2006 Pontiac Grand Prix, 2006 Pontiac G6, and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Prying Thrust Bearing Off 1-2 Support Drum
    GM10612Courtesy of GENERAL MOTORS CORP.
  1. Use a small screwdriver in order to gently pry the thrust bearing (685) off of the 1-2 support drum (687).
  2. Lift the 1-2 clutch roller assembly (683) out of the 1-2 support drum.
scientia non olet · About LEMON Manuals