LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Automatic Transaxle - 4T65-E - Overhaul) >> Repair Instructions >> 1-2 Support Drum and Forward Band Removal >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 Saturn Relay, 2006 Pontiac Montana SV6, 2006 Pontiac Grand Prix, 2006 Pontiac G6, and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing 1-2 Support Drum Out Of The Case Using J 38358-A
    GM10558Courtesy of GENERAL MOTORS CORP.
  1. Install J 38358-A  onto the 1-2 support drum assembly (681-687).
  2. Lift J 38358-A  with the 1-2 support drum out of the case.
    3. Fig 2: Locating Forward Band Assembly
    GM893327Courtesy of GENERAL MOTORS CORP.
  3. Tilt the forward band assembly (688) in order to disengage the band from the anchor pin in the case. Remove the forward band assembly.
scientia non olet · About LEMON Manuals