Removal Procedure
WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Open and support the rear compartment lid.
- Use a small flat-bladed tool in order to lift up the locking clip on the strut upper ball stud.
- Press out the upper ball stud.
- Use a small flat-bladed tool in order to lift up the locking clip on the strut lower ball stud.
- Press out the lower ball stud.
- Remove the rear compartment lid strut from the hinge.
NOTE:
Refer to Liftgate/Hood Assist Rod Notice in Cautions and Notices.