LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 238 (Engine Exhaust System) >> Repair Instructions >> Exhaust System Insulator, Hanger, Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Exhaust Hangers
    GM1544741Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the exhaust insulators (1) from the exhaust system (2) and vehicle body if replacement of insulator is necessary.
    3. Fig 2: Removing/Installing Exhaust Hanger
    GM1544740Courtesy of GENERAL MOTORS CORP.
  3. Remove the exhaust system hanger bolts (2).
  4. Remove the exhaust system hanger (1).
scientia non olet · About LEMON Manuals