LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 238 (Engine Exhaust System) >> Repair Instructions >> Exhaust Muffler Heat Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the muffler. Refer to Muffler Replacement .
    2. Fig 1: Identifying Exhaust Muffler Heat Shield Rivets
    GM1681511Courtesy of GENERAL MOTORS CORP.
  2. Drill out the muffler heat shield rivets
    3. Fig 2: Identifying Muffler Heat Shield Rivets
    GM1681514Courtesy of GENERAL MOTORS CORP.
  3. Drill out the muffler heat shield rivets, if equipped with a long wheel base (LWB).
  4. Remove the muffler heat shield.
scientia non olet · About LEMON Manuals