LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (Engine Mechanical - 3.9L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Rotating the Engine for Service Access >> Procedure

Rotating the Engine for Service Access: Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Engine Mount Strut Bracket
    GM1675028Courtesy of GENERAL MOTORS CORP.
  1. Remove the air cleaner outlet duct. Refer to AIR CLEANER OUTLET DUCT REPLACEMENT .
  2. Set the park brake.
  3. Shift the transaxle into Neutral.
  4. Loosen and remove the engine mount strut to engine mount strut bracket through bolts (2, 4) and nuts (3, 5).
  5. Rotate the engine mount struts up out of the way.
    6. Fig 2: View Of Engine Tilt Strap (J 41131)
    GM401357Courtesy of GENERAL MOTORS CORP.
  6. Install the J 41131  .
  7. Pull on the engine in order to rotate the engine forward.
  8. Tighten the J 41131  .
scientia non olet · About LEMON Manuals