LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (Engine Mechanical - 3.9L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Mount Strut Bracket Replacement - Upper Radiator Support >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement 
    2. Fig 1: Identifying Engine Mount Strut Bracket Through Bolt & Nut
    GM1675030Courtesy of GENERAL MOTORS CORP.
  2. Loosen and remove the engine mount strut to engine mount strut bracket through bolts (1, 3) and nuts (2, 4).
  3. Rotate the engine mount struts up out of the way.
    4. Fig 2: View Of Engine Mount Strut Bracket Bolts
    GM1675031Courtesy of GENERAL MOTORS CORP.
  4. Remove the engine mount strut bracket bolts (1, 2).
  5. Remove the engine mount strut brackets (3, 4).
scientia non olet · About LEMON Manuals