LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (Engine Mechanical - 3.9L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Tensioner Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drive belt. Refer to Drive Belt Replacement .
  2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
    3. Fig 1: Identifying Drive Belt Tensioner & Bolt
    GM1556794Courtesy of GENERAL MOTORS CORP.
  3. Remove the drive belt tensioner bolt.
  4. Remove the drive belt tensioner.
scientia non olet · About LEMON Manuals