Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Piston Oil Nozzles

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Position the piston oil nozzles in the engine block.
Install the bolts retaining the piston oil nozzles to the engine block.
Tighten: Tighten bolt to 10 Nm (89 lb in).