LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (Engine Mechanical - 3.9L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Intake Manifold Removal - Upper >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying PCV Foul Air Tube
    GM1639208Courtesy of GENERAL MOTORS CORP.
  1. Remove the foul air PCV tube.
    2. Fig 2: View Of Upper Intake Manifold Bolts, Studs & Gaskets
    GM1639211Courtesy of GENERAL MOTORS CORP.
  2. Remove the upper intake manifold bolts, stud and manifold absolute pressure (MAP) sensor bracket.
  3. Remove the upper intake manifold and gaskets.
scientia non olet · About LEMON Manuals