Inspection Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the camshaft position actuator magnet for the following conditions:
- The camshaft position actuator magnet wiring connector (1) for damage.
- The camshaft position actuator magnet O-ring seal and sealing area (2) for damage.
- Repair or replace the camshaft position actuator housing and/or components as necessary.