Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6 and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Transaxle Brace Bolts (LA1)

Courtesy of GENERAL MOTORS CORP.

Install the transaxle brace.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the transaxle brace bolts.
Tighten: Tighten the bolts to 47 N.m (35 lb ft).
Lower the vehicle.