LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 235 (Vibration Symptoms Diagnosis And Correction) >> Diagnostic Information and Procedures >> Transfer Case Output Flange Runout Measurement >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

J 7872  Magnetic Base Dial Indicator Set or equivalent

The transfer case output flange radial runout must be measured on the machined surface of the propeller shaft front constant velocity (CV) joint housing, as close to the flange as possible.

scientia non olet · About LEMON Manuals