Circuit Description
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
The throttle actuator control (TAC) motor is controlled by the TAC module using various inputs from the powertrain control module (PCM) which are communicated across serial data. The DC motor located on the throttle body drives the throttle plate. In order to decrease idle speed, the TAC module commands the throttle closed, reducing air flow into the engine. In order to increase idle speed, the TAC module commands the throttle plate open, allowing more air to pass the throttle plate. If the actual idle RPM does not match the desired idle RPM within a calibrated time, DTC P0506 sets.