LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 231 (Engine Controls - 3.9L - DTC P0442 To P2A01) >> DTC P0442 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
  • Larger volume fuel tanks and/or those with lower fuel levels may require several minutes for the floating indicator to stabilize.
  • Refer to the J 41413-200  operation manual for detailed instructions.
  1. Using the GE-41415-50  , connect the J 41413-200  to the vehicle filler neck.
  2. Use the flow meter on the J 41413-200  , calibrated to 0.51 mm (0.020 in) to determine that there is no leak in the EVAP system.
    • If a leak is detected use the J 41413-200  to apply smoke to the EVAP system at the service port or the filler neck until the leak is located.
scientia non olet · About LEMON Manuals