P1114 or P1115
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Observe the ECT sensor parameter on the scan tool, while moving the ECT sensor connector and the control module connector. Is there an abrupt change indicated on the scan tool?
- If change, then repair the connector or terminal as necessary.
- If no change, observe the ECT sensor parameter on the scan tool, while moving the wiring harness at the ECT sensor and the control module. If there is a change on the scan tool, then repair the wiring as necessary.
- If everything checks out, then refer to Testing for Intermittent Conditions and Poor Connections .