Circuit/System Description: P0125

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

An ECT sensor monitors the temperature of the coolant. This input is used by the control module for engine control and as an enabling criteria for some diagnostics. The air flow into the engine is accumulated and used to determine if the vehicle has been driven within the conditions that would allow the engine coolant to heat up normally to the Closed Loop temperature. If the coolant temperature does not increase normally or does not reach the Closed Loop temperature, the diagnostics that use engine coolant temperature as enabling criteria may not run when expected. If the control module detects the calibrated amount of air flow and engine run time have been met and the engine coolant has not met the Closed Loop temperature, DTC P0125 sets.