Circuit/System Verification
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- With the engine running, observe the Cylinder 1 and 4 IC Circuit Status, Cylinder 2 and 5 IC Circuit Status and the Cylinder 3 and 6 ignition control (IC) Circuit Status parameters with the scan tool. All of the parameters should display OK.
- If the parameters display anything other than OK, continue with Circuit/System Testing.
- With the engine running, observe the Misfire Current counters using the scan tool. The counters should not be incrementing.
- If the counters are incrementing for a pair of companion cylinders, continue with Circuit/System Testing.