LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 223 (Seat System) >> Repair Instructions >> Upper Limit Switch Replacement - Sit-N-Lift >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper seat trim. Refer to Trim Replacement - Sit-N-Lift Upper .
  2. Remove the chain cover. Refer to Chain Cover Replacement - Sit-N-Lift .
    3. Fig 1: Locating Bolts For Limit Switch Bracket - Sit-N-Lift
    GM1412317Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolts from the limit switch bracket.
  4. Disconnect the electrical connector.
    5. Fig 2: View Of Upper Limit Switch - Sit-N-Lift
    GM1412321Courtesy of GENERAL MOTORS CORP.
  5. Remove the switch.
scientia non olet · About LEMON Manuals