LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 223 (Seat System) >> Repair Instructions >> Trim Replacement - Sit-N-Lift Upper >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Trim Covers - Sit-N-Lift
    GM1368561Courtesy of GENERAL MOTORS CORP.
  1. Install the rear trim cover.
  2. Align the left trim cover with the rear trim cover and attach with the cover fasteners.
  3. Align the right trim cover with the rear trim cover and attach with the cover fasteners.
scientia non olet · About LEMON Manuals