LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 223 (Seat System) >> Repair Instructions >> Trim Replacement - Sit-N-Lift Base >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Extend the seat to the outside position from the vehicle.
  2. Fig 1: View Of Trim Covers - Sit-N-Lift
    GM1368561Courtesy of GENERAL MOTORS CORP.
  3. Remove the fasteners from the upper trim seat base.
  4. Fig 2: View Of Front Lower Base - Sit-N-Lift
    GM1368294Courtesy of GENERAL MOTORS CORP.
  5. Remove the front seat base trim cover from the base.