LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 223 (Seat System) >> Repair Instructions >> Trim Replacement - Sit-N-Lift Base >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Front Lower Base - Sit-N-Lift
    GM1368294Courtesy of GENERAL MOTORS CORP.
  1. Align the front seat base trim cover with the base and fasten the cover in place.
  2. Fig 2: View Of Trim Covers - Sit-N-Lift
    GM1368561Courtesy of GENERAL MOTORS CORP.
  3. Return the seat to the vehicle and inspect for proper operation.