Trim Panel Replacement - Rear Seat Back

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Trim Panel - Seat Back

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .
1	Pocket Assembly, Seat Back Cushion Panel Tip: Pull down to open the pocket assembly and squeeze together while pulling rearward to disengage from seat back panel.
2	Panel Assembly, Seat Back Cushion Tip: Using a flat bladed tool to help release the clips at the bottom edge of the seat back panel, pull the seat back panel rearward and down to remove.