Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Screws For Roll-Up Chain Cover

Courtesy of GENERAL MOTORS CORP.

Install the roll-up chain cover.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the screws to the chain cover.
Tighten: Tighten the screws to 2 N.m (18 lb in).

Fig 2: Locating Fasteners For Rear Of Seat

Courtesy of GENERAL MOTORS CORP.

Install the fasteners to the rear of the seat.
Return the seat to the vehicle.
Test the seat for proper operation.