Removal Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the instrument panel (I/P) assembly. Refer to Instrument Panel (I/P) Assembly Replacement in Instrument Panel, Gages and Console.
- Lift up on the retaining tab and rotate the air distribution extension duct (1, 2).
- Remove the air distribution extension duct (1, 2) from the crosscar beam.