Installation Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Align the tabs on the air distribution extension duct (1, 2) with the slots in the crosscar beam.
- Rotate the air distribution extension duct to secure the retaining tabs to the crosscar beam.
- Install the I/P assembly. Refer to Instrument Panel (I/P) Assembly Replacement in Instrument Panel, Gages and Console.