LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Compressor Relay Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Compressor Relay
    GM1547624Courtesy of GENERAL MOTORS CORP.
  1. Remove the underhood electrical center cover.
  2. Locate the compressor relay. Refer to Electrical Center Identification Views to locate the A/C compressor relay.
    3. IMPORTANT:
    • Always note the orientation of the relay.
    • Ensure that the electrical center is secure, as not to put added stress on the wires or terminals.
  3. Using the J 43244  position the tool on opposing corners of the compressor relay.
  4. Remove the relay from the electrical center.
scientia non olet · About LEMON Manuals