Installation Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Install the center floor duct (2).
- Install the floor duct (3) to the center floor duct (2).
- Install the floor duct brace (2).
- Install the floor duct brace nuts (1).
Tighten: Tighten the nuts to 10 N.m (89 lb in).
- Position the front of the carpet forward.
- Install the front seats. Refer to Seat Replacement - Front Bucket in Seats.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.