LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 215 (Hydraulic Brake System) >> Repair Instructions >> Vacuum Brake Booster Check Valve and/or Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Vacuum Hose From Vacuum Check Valve
    GM177473Courtesy of GENERAL MOTORS CORP.
  1. Install vacuum check valve to vacuum hose.
  2. Connect the vacuum hose to the intake manifold.
  3. Connect the vacuum check valve to vacuum brake booster.