LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Parking Brake System) >> Repair Instructions >> Park Brake Cable Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the park brake cable into the support bracket.
  2. Install the park brake cable to the actuator lever.
  3. Install the rear wheel. Refer to Tire and Wheel Removal and Installation .
    4. Fig 1: View Of Front Brake Cable Connected To Right Rear Cable
    GM717002Courtesy of GENERAL MOTORS CORP.
  4. Connect the rear cable (3) to the front cable (1).
  5. Adjust the park brake. Refer to Park Brake Adjustment .
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals