LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (Suspension Control System - Suspension Leveling) >> Repair Instructions >> Shock Absorber Crossover Air Tube Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Air Line
    GM187209Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Replace any tube retaining clips which you have removed from the vehicle with new clips.
  1. Install the tube retaining clips to the vehicle.
  2. Install the air crossover tube (1) to the compressor air supply tube.
  3. Install the air crossover tube (1) to the right shock absorber.
  4. Install the air crossover tube (1) to the left shock absorber.
  5. Lower the vehicle.
  6. Remove the ELC/TRAILER fuse.
scientia non olet · About LEMON Manuals