LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (Suspension Control System - Suspension Leveling) >> Repair Instructions >> Automatic Level Control Air Dryer Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Automatic Level Control Air Dryer Components
    GM187273Courtesy of GENERAL MOTORS CORP.
  1. Remove the automatic level control air compressor from the vehicle. Refer to Air Compressor Replacement .
  2. Clean the area around the connection of the air dryer (2) to the automatic level control air compressor head (1).
  3. Rotate the spring clip retaining the dryer to the automatic level control air compressor 90 degrees.
  4. Remove the air dryer (2) from the air dryer bracket and the automatic level control air compressor.
scientia non olet · About LEMON Manuals