LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (Suspension Control System - Suspension Leveling) >> Repair Instructions >> Air Compressor Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Lower the automatic level control (ALC) air compressor assembly. Refer to Air Compressor Replacement .
  3. Remove the ALC compressor relay. Refer to Automatic Level Control Relay Replacement .
  4. Fig 1: Locating ALC Shield Bolt
    GM898568Courtesy of GENERAL MOTORS CORP.
  5. Remove the ALC shield bolt (1) and retainers.
  6. Remove the ALC shield (2) from the vehicle.