LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (Suspension Control System - Suspension Leveling) >> Description and Operation >> Automatic Level Control Description and Operation >> Tubing and Fittings

Tubing and Fittings

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

The snap-on connectors attach the tubing to the rear shock absorbers. The connector housings contain retainer clips. When a tubing is attached to a shock fitting, the retainer clip snaps into a groove in the shock fitting, locking the tubing in position. All tubing fittings are sealed with 2 O-rings.

scientia non olet · About LEMON Manuals