LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 210 (Rear Suspension System) >> Repair Instructions >> Rear Axle Lower Control Arm Bushing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Install the new bushing to the crossmember in the same manner as the old bushing, noting the voids.
  1. Use the J 21474-01  in order to install the bushing to the crossmember.
    2. Fig 1: View Of Bushing To Crossmember
    GM771999Courtesy of GENERAL MOTORS CORP.
  2. Install the lower control arm.
scientia non olet · About LEMON Manuals