Removal Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the vent hose clamp (2) from the vent hose (1).
- Release the clip securing the vent hose to the vehicle underbody.
- Remove the vent hose from the differential assembly vent tube by carefully twisting the hose.