Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle.
Position a jack stand under the front of the rear differential and firmly secure the differential to the jack.
Remove the front propeller shaft. Refer to Propeller Shaft Replacement .

Fig 1: Torque Tube And Components

Courtesy of GENERAL MOTORS CORP.

Remove the torque tube-to-bracket through bolt (7) and nut (1).

Fig 2: Identifying Torque Tube-To-Differential Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the torque tube-to-differential bolts (1).

Fig 3: View Of Torque Tube & Differential Pinion Shaft

Courtesy of GENERAL MOTORS CORP.

Pull the torque tube (1) toward the front of the vehicle in order to disengage the torque tube from the differential pinion shaft.
Remove the torque tube from the differential (2).