LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (Wheel Alignment System) >> Repair Instructions >> Rear Camber Adjustment >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place vehicle on alignment machine with rear wheels supported by Weaver plates.
    2. Fig 1: Identifying Lower Control Arm To Crossmember Mounting Bolts
    GM629235Courtesy of GENERAL MOTORS CORP.
  2. Loosen rear lower control arm mounting nuts (3, 4).
  3. Adjust camber with cam bolt (1).
  4. Confirm correct camber value.
  5. Check toe alignment and adjust if required.
scientia non olet · About LEMON Manuals