Installation Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Install the oil pan gasket (25).
- Install the oil pan (24).
- Install the oil pan bolts (23).
Tighten: Tighten the oil pan bolts (23) to 14 N.m (10 lb ft).
- Lower the vehicle.
- Adjust the fluid level. Refer to the following information.
- Transmission Fluid Checking Procedure
- Fluid and Lubricant Recommendations in Maintenance and Lubrication.
- Capacities - Approximate Fluid in Maintenance and Lubrication.
- Inspect for fluid leaks.
NOTE:
Refer to Fastener Notice in Cautions and Notices.
NOTE:
Do NOT overfill the transaxle. The overfilling of the transaxle causes foaming, loss of fluid, shift complaints and possible damage to the transaxle.