Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

Fig 1: Identifying Reference Mark At Transfer Case Flange

Courtesy of GENERAL MOTORS CORP.

Reference mark the propeller shaft at the transfer case flange.

Fig 2: Removing/Installing Propeller Shaft-To-Transfer Case Flange Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the propeller shaft-to-transfer case flange bolts.

Fig 3: Identifying Reference Mark At Torque Tube Flange

Courtesy of GENERAL MOTORS CORP.

Reference mark the propeller shaft at the torque tube flange.

Fig 4: View Of Propeller Shaft-To-Torque Tube Flange Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the propeller shaft-to-torque tube flange bolts.
Push the propeller shaft toward the rear of the vehicle.
Remove the propeller shaft.