LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 204 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Replacement (FWD) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the left front tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
    3. Fig 1: Identifying Stabilizer Shaft Components
    GM1544893Courtesy of GENERAL MOTORS CORP.
  3. Remove the left and right stabilizer shaft link lower nut (3).
  4. Remove the stabilizer shaft link (2) from the stabilizer shaft.
    5. Fig 2: View Of Insulator Brackets
    GM357447Courtesy of GENERAL MOTORS CORP.
  5. Remove the left and right stabilizer shaft insulators and brackets. Refer to Stabilizer Shaft Insulator Replacement .
  6. Remove the stabilizer shaft from the left side of the vehicle.
scientia non olet · About LEMON Manuals