Removal Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Move/turn the tires in order to access the stabilizer shaft insulator brackets.
- Remove the left and right side stabilizer shaft insulator bracket bolts.
- Remove the left and right side stabilizer shaft insulator brackets.
- Remove the left and right side stabilizer shaft insulators (1) from the stabilizer shaft (2).