LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Engine Mechanical - 3.5L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Valve Rocker Arm and Push Rod Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the valve rocker arm covers. Refer to Valve Rocker Arm Cover Replacement - Left  or Valve Rocker Arm Cover Replacement - Right .
    2. Fig 1: View Of Valve Rocker Arm
    GM54392Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Keep the components separated in order to install the components in the same location.
  2. Remove the rocker arm bolts.
  3. Remove the rocker arms.
  4. Remove the pushrods.
scientia non olet · About LEMON Manuals